KÉO BLADE CARBON

Designed to win, the new KEO BLADE CARBON improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to daily input from the greatest of champions.

Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON has all the assets to allow you to improve and optimize your performance until victory is yours. It is for these reasons that KEO BLADE CARBON is the unanimous choice of many champions who have made it a weapon of choice in the conquest of their greatest achievements.

The KEO BLADE CARBON has the best weight / power ratio in its class.

Its new design completely integrates the blade for unrivaled aerodynamics. Equipped with a carbon body and blade, the Blade Carbon is available in a Ti version (titanium spindle) that weighs a mere 95g per pedal, or in a CrMo version (chromoly spindle) for a weight of 110g per pedal. It is available in three tension release levels: 12,16 and 20.

OPTIMIZED SPINDLE: MORE POWER TRANSFER AND RELIABILITY

The spindle of the new CARBON BLADE has been completely redesigned. It is built around an oversized axle and spindle that passes through internal roller and needle bearings located directly under the pedal platform. This new construction saves approximately 2 watts at 100 rpm.

The distance between the roller and needle bearings has been increased by 25%. This provides more rigidity along the entire length of the spindle, and as a consequence, improved power transmission.

Special attention has also been given to ensure that it is water resistant. Weather resistance has been improved by 120% for even more reliability and longevity. To accomplish this, the new spindle received an updated endplug with an o-ring washer and has also been equipped with an internal, double-lipped seal.

LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.

ULTRA-POWERFUL PLATFORM

To meet the demands of the most demanding cyclists, especially competitors, the pedal-cleat system must allow efficient power transfer thanks to a broad and rigid platform.

The platform of the CARBON BLADE is fitted with a 67mm-wide stainless steel plate, optimizing the cleat/pedal contact areas, regardless of pedaling angle.

With 700 mm² of surface area, the CARBON BLADE offers an optimized contact platform for an efficiency and power transfer that is unmatched on today’s market.

Its weight / power ratio positions it well above the competition

BODY AND BLADE CARBON TECHNOLOGY

Using a carbon body lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer.

BLADE technology is a major technical innovation in the history of the automatic pedal because of its many benefits: LIGHTWEIGHT, AERODYNAMIC, ULTRA-SECURE WHEN CLIPPING IN AND OUT

KÉO BLADE CARBON Ceramic

Designed to win, the new KEO BLADE CARBON improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to daily input from the greatest of champions.

Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON has all the assets to allow you to improve and optimize your performance until victory is yours. It is for these reasons that KEO BLADE CARBON is the unanimous choice of many champions who have made it a weapon of choice in the conquest of their greatest achievements.

The KEO BLADE CARBON has the best weight / power ratio in its class.

Its new design completely integrates the blade for unrivaled aerodynamics. Equipped with a carbon body and blade, the Blade Carbon is available in a Ti version (titanium spindle) that weighs a mere 95g per pedal, or in a CrMo version (chromoly spindle) for a weight of 110g per pedal. It is available in three tension release levels: 12,16 and 20.

OPTIMIZED SPINDLE: MORE POWER TRANSFER AND RELIABILITY

The spindle of the new CARBON BLADE has been completely redesigned. It is built around an oversized axle and spindle that passes through internal roller and needle bearings located directly under the pedal platform. This new construction saves approximately 2 watts at 100 rpm.

The distance between the roller and needle bearings has been increased by 25%. This provides more rigidity along the entire length of the spindle, and as a consequence, improved power transmission.

Special attention has also been given to ensure that it is water resistant. Weather resistance has been improved by 120% for even more reliability and longevity. To accomplish this, the new spindle received an updated endplug with an o-ring washer and has also been equipped with an internal, double-lipped seal.

LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.

ULTRA-POWERFUL PLATFORM

To meet the demands of the most demanding cyclists, especially competitors, the pedal-cleat system must allow efficient power transfer thanks to a broad and rigid platform.

The platform of the CARBON BLADE is fitted with a 67mm-wide stainless steel plate, optimizing the cleat/pedal contact areas, regardless of pedaling angle.

With 700 mm² of surface area, the CARBON BLADE offers an optimized contact platform for an efficiency and power transfer that is unmatched on today’s market.

Its weight / power ratio positions it well above the competition

BODY AND BLADE CARBON TECHNOLOGY

Using a carbon body lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer.

BLADE technology is a major technical innovation in the history of the automatic pedal because of its many benefits: LIGHTWEIGHT, AERODYNAMIC, ULTRA-SECURE WHEN CLIPPING IN AND OUT

KÉO BLADE CARBON TI

Designed to win, the new KEO BLADE CARBON improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to daily input from the greatest of champions.

Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON has all the assets to allow you to improve and optimize your performance until victory is yours. It is for these reasons that KEO BLADE CARBON is the unanimous choice of many champions who have made it a weapon of choice in the conquest of their greatest achievements.

The KEO BLADE CARBON has the best weight / power ratio in its class.

Its new design completely integrates the blade for unrivaled aerodynamics. Equipped with a carbon body and blade, the Blade Carbon is available in a Ti version (titanium spindle) that weighs a mere 95g per pedal, or in a CrMo version (chromoly spindle) for a weight of 110g per pedal. It is available in three tension release levels: 12,16 and 20.

OPTIMIZED SPINDLE: MORE POWER TRANSFER AND RELIABILITY

The spindle of the new CARBON BLADE has been completely redesigned. It is built around an oversized axle and spindle that passes through internal roller and needle bearings located directly under the pedal platform. This new construction saves approximately 2 watts at 100 rpm.

The distance between the roller and needle bearings has been increased by 25%. This provides more rigidity along the entire length of the spindle, and as a consequence, improved power transmission.

Special attention has also been given to ensure that it is water resistant. Weather resistance has been improved by 120% for even more reliability and longevity. To accomplish this, the new spindle received an updated endplug with an o-ring washer and has also been equipped with an internal, double-lipped seal.

LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.

ULTRA-POWERFUL PLATFORM

To meet the demands of the most demanding cyclists, especially competitors, the pedal-cleat system must allow efficient power transfer thanks to a broad and rigid platform.

The platform of the CARBON BLADE is fitted with a 67mm-wide stainless steel plate, optimizing the cleat/pedal contact areas, regardless of pedaling angle.

With 700 mm² of surface area, the CARBON BLADE offers an optimized contact platform for an efficiency and power transfer that is unmatched on today’s market.

Its weight / power ratio positions it well above the competition

BODY AND BLADE CARBON TECHNOLOGY

Using a carbon body lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer.

BLADE technology is a major technical innovation in the history of the automatic pedal because of its many benefits: LIGHTWEIGHT, AERODYNAMIC, ULTRA-SECURE WHEN CLIPPING IN AND OUT

X-TRACK RACE

LOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable, durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism, is resistant to the negative effects of coming into contact with various external factors (rocks, roots, mud…), and provides consistent and reliable performance over time. Its spindle, equipped with a double weather-resistant seal, has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride, and therefore, more fun

THE BEST
POWER TO WEIGHT RATIO

All the energy you produce is transferred to your MTB through your pedals. Their role, is therefore, crucial.

LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product.

Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh.

The challenge faced by our engineers was therefore, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market.

LATERAL CONTACT SUPPORT

Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support.

MECHANISM GEOMETRY

The mechanism works regardless of external conditions (in the mud, forces are significantly different from those encountered when dry), more space allows for the shedding of various foreign matter (mud, sand…). These zones give the user a constant and stable feeling of being securely clip-ped in, in all conditions.

X-TRACK RACE CARBON

LOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable, durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism, is resistant to the negative effects of coming into contact with various external factors (rocks, roots, mud…), and provides consistent and reliable performance over time. Its spindle, equipped with a double weather-resistant seal, has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride, and therefore, more fun

THE BEST
POWER TO WEIGHT RATIO

All the energy you produce is transferred to your MTB through your pedals. Their role, is therefore, crucial.

LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product.

Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh.

The challenge faced by our engineers was therefore, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market.

LATERAL CONTACT SUPPORT

Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support.

MECHANISM GEOMETRY

The mechanism works regardless of external conditions (in the mud, forces are significantly different from those encountered when dry), more space allows for the shedding of various foreign matter (mud, sand…). These zones give the user a constant and stable feeling of being securely clip-ped in, in all conditions.

 SPD-SL  PD-R7000 CARBON PEDAL